skyline gtr/gtst parts

one set of gtr 32 turbos just rebuild 1000kms ago standard. $1200pair

one gtr33 highflow with steelwheels just been rebuild 2000kms $820

one standard 33gtst turbo $570

one t3/t4 garret in good condition needs wastegate $900

turbonetics wastegate (racegate) 42mm in good condition $650

wiesco forged pistons for toyota 3sgte 40thow over only done 1000kms still perfect $600

intercooler core 600x300x75 bar&plate garret core brand new $650

gtr33 seats in good condition $1390 the pair

gtr33 crank in perfect condition $380

gtr33 original manifolds and dumps and waterlines and hoses $offers?

gtr33 or 33gtst RSRcat-back exhaust sysytem 3/5' polished stanless as new.$750ono

gtr33 pair of air flow meters $700

gtst33 airflow meter $190

gtr32 or gtst32 original carmats full set front & back $100

greddy gauges oil-temp electronic white face complete withh everything to install as new $400

autometer oil-pressure gauge pro comp liqurd-filled black face with cup holder $90

itsmefashions@hotmail.com

can supply photos on some parts

I don's suppose you have a rear strut bar for an R33 GTR???

i can get a hold of one if your intrested? i also have some ajustble front caster rods for gtst33 asking$390

Originally posted by MR2GTR33
i can get a hold of one if your intrested? Yes, I may be interested depending on price. If you send me a PM if you find one and what cost you’re looking at, we can go from there. Thanks :)

Do u still have the exhaust ?

Is it made for a gtr or gtst ?
bec they are slightly different.
Where about are you ?

Also do u have a front and rear strut brace for a gtst ?

the exhaust bolt straigt onto the gtst and for the gtr you have to run a spacer flange plate inbetween in two flanges at the rear muffler and fits perfect. i have tryed it on my gtr and my gtst.

here is a pic of the exhaust. it looks like this but its not this one, mine is in better condition.

Have you still got the intercooler or can get your hands on one. I'm after a standard Skyline GTR intercooler at a good price :D

the apexi one has been sold but i can get a core for a gtr

basically what I was looking for was just a standard factory GTR intercooler. I'm going to fit it to my RB20DET powered Cefiro. I only need the intercooler as I will get someone to fabricate the piping for me.

By core I assume that comes with the inlet and outlet pipes and mounting points?

Ta.

its just a core and its brand new, bar and plate 3' thick

here is a pic of my car with the same intercooler but mine is 3/5' thick and it made 40hp @ the wheels more on the same boost than the standard gtr intercooler. i dont have brakets or end tanks but you can get your fabracator to make them and it will still cost cheaper than a gtr intercooler.

what price is on the core?
And how much would the end tanks and brackets cost to fabricate roughly?
I can get a complete secondhand GTR intercooler for $950 which seems to be the best price I've seen so far....

Any recommendations on fabricators in Sydney area?

roughtly 150-200 for the end tanks and brackets and $650 for the core and it would be a much thicker than the gtr core and would flow much better.

Thanks for the info!!

I need GTR downpipe flanges, and the 2 bolt compressor elbows for the turbos, do you have any of that?

I need GTR downpipe flanges, and the 2 bolt compressor elbows for the turbos, do you have any of that?

Considering this thread is 1 1/2 years old I seriously doubt you would get a responce!