Neon underbody kit location?

I recently bought a neon underbody kit for my car and was going to put it on when I realized that I wasnt too sure where the best place is to locate them safely. I know a lot of guys have out them on their t-bird's and I was just wondering if any of you guys would have any ideas. Its a '95 LX 4.6L. Thanx.

alright well it looks like Im gonna have to just guess on this one and put them where I can. Im putting them on in 2 days so if anybody has any ideas b4 then Id appreciate it. Thanx.

If you have an aftermarket body kit, you can place them up beside the sideskirts on the sides. As for the back and front... Just find a place that isn't visible at eye level, and mount them up. I haven't really looked at the rear end, but there isn't much room in the front, that's for sure. Unless you cut away that black splash shield some so that you can mount it up in that area, and cut some more holes in it to better allow the light to come through. Then you would also be able to see the light glowing through the lower front of your bumper...

Those are just a few solutions, but your best bet is going to be put your car up on a rack or lift and take the lights and put them in different places until you find the spot that you like the best. Good luck, and let us know how it goes including pictures of the finished product. :D

thanks for the input. I ont have the black splash shield on it now cause its too low low w/ the 2in drop and it kept getting ripped off. So I have a place for the front and rear but I'm not too sure about the sides. No I dont have a body kit on it but however the spots I was looking at you really cant see from a standing postion. I was more worried about the protection factor b/c like I said it is VERY low. Ill deffinately put up pics when I get it done. Thanks.