5-speed conversion

im thinking about converting my 94 5.0 to a 5-speed. what all will i need. and what kind of job am i looking at.
will i need more than...
trans, clutchkit, clutch cable, pedal set, shifter, bellhousing?

Driveshaft, flywheel and I think some wiring for the neutral safety switch. It's time consuming job, but can be done with success.

isit worth the trouble though.. or should i just get rid of it and start over with another stang

That is up to you. I would not waste the time, but that is me.

How much trouble would this be if you were going to swap from another car and you had both?

I've thought about this for my '86 and have talked to several people. I guess they make kits for around $1,200 that has the transmission, clutch, and everything. The hardest part I hear is putting the clutch peddle in and messing with the fire wall.

do you know where i could find such a kit

Also after 93 I believe your going to have to change computers unlike in the 87-93 5.0's, need a manual h-pipe hanger for a standard, shorter bellhousing bolts for the top two. Lot of lil other things i'm not gonna try to remember.

go to www.prestigemustang.com 404-294-4869 they have a large parts also go here to see a swap inventory.http://wcfords.com/articles/tech/t5swap/t5swap.html
I did it and it was such a good feeling knowing that I could do something like this. You will like it, I promise. The hardest part of the hole thing is installing the pedels. Good luck.

that tech article is great but my car is a 94 the article only covers 87-93 fox bodies. but the other site could be of some great use.thanks. about how long did it take you to do yours.

Sorry I sent the wrong one. I don't remember what web site it was but if you do a search on it I'm sure that you'll find it. I'll keep looking and post it as soon as I find it.