compression

ok i did a comp test today and idk which cylinder is which but from the dizzy side to t belt side it goes 210 psi, 200, 220, 235. wondering if these are good numbers or if its bad that i have uneven compression, just wondering what the comp is supposed to be on B16A



took tranny off today, getting flywheel resurfaced tomarow and rreplacing the clutch tomarrow.......

the 200 and 210 seem alittle low compared to the others. try drop some oil down the cylinder and see if that raises the cr.

the 235 looks good, but, kinda off with the other three. go with a leakdown too if you can. it will be nice to pinpoint down the reasons why one is at 235 and the others are a little lower.

Last time I did a compression check on my b16 it was about 215 to 225.