motor winding?

hey iv got a 91 laser 2.0 one day out of no were my engine just started to give off a really bad winding noise. the car still runs and drives but at about 5 6 grand i loose all of my power. is my crank starting to walk? or wat could this be thanks guys. BY the way im looking for a new motor if anyine knows were to get one plz let me know.

did you check your oil? turbo or NT? does the noise change with rpm or with wheel speed? does it change when you push in the clutch (if you have one)

put the year, make, model, engine, trans, and any mods in your sig so you dont forget

its a 2.0 non turbo yes i checked my oil its a 5 speed 91 laser

it is a 91 laser non turbo 5 speed it almost sounds like a spun bearing

a spun bearing usually makes a knocking noise not a winding noise. does it change with rpm or wheel speed? does it change when you push in the clutch?

could it be something in the tranny maybe? motor noises usually knock really loud, not whine. maybe a wheelbearing, or maybe something in the tranny too if your losing all your power.

i dont think its coming from the tranny and it ant the wheel bearing. could it be a cam shaft bearing poss or is my crank walking? i think i might just run it till she blows i need a new motor anyways

the higher the rpm the louder it gets

does it change when you push the clutch in and out. not to doubt you but in my experience whining noises are usually from the trans or wheels

6 bolts came in 89-92's so you don't have to worry about crankwalk :smokin: I have never ever ever seen a 6bolt crankwalk. But the winding I have no idea what it could be...bearings sounds like a good bet, but go take it to get checked out to be sure.

ok thanks man ill have it looked at as soon as i get back from md jersey and pa then ill havew it look at and i think i might have her sold i hope my buddy had a 90 eclipse and he had crank walk i hear the american version sucks really bad and basicly as soon as u get the car to order a mototr from japan wat do u think