looking at '92
97dakotav8
04-06-2005, 04:38 PM
i'm currently looking at a '92 blazer 4.3l v6 4x4 auto. Any thing i should be looking out for?
BlazerLT
04-06-2005, 05:09 PM
Yes, have the cpi injector and nut kit checked for leaking.
See if it starts right up or if it takes more revolutions to get it to fine initially.
Check for maintanence and fluid changes and check.
See if it starts right up or if it takes more revolutions to get it to fine initially.
Check for maintanence and fluid changes and check.
97dakotav8
04-09-2005, 11:40 AM
was told it had regular maintence, they only want $500cnd for it, and I should be able to get it on the road for another $500, it had a leaky return line on the gas tank
BlazerLT
04-09-2005, 05:13 PM
Does it have the thottle body or CPI injection system.
Round filter on top of the engine = TBI
Spider plenum on top with the vortec name plate on it = CPI
Round filter on top of the engine = TBI
Spider plenum on top with the vortec name plate on it = CPI
mikencrew
04-20-2005, 02:23 PM
how can i make my 92 4.3l blazer louder
BlazerLT
04-20-2005, 03:40 PM
Install a aftermarket muffler.
97dakotav8
04-24-2005, 02:34 PM
well it took an additional $1000 cnd, it needed complete exhaust from manifolds back, fuel pump, sending unit, so total $2200 cnd.
BlazerLT
04-24-2005, 02:52 PM
Set some money aside for a CPI injector and nut kit replacement.
You paid $2200 to fix all that?
You paid $2200 to fix all that?
Automotive Network, Inc., Copyright ©2026
