'96 Rodeo Drivers Brake Light

Tail light unit is sealed. Can be taken off vehicle with four screws but access to bulbs seems to be from front of unit. How do you pop off the lens cover to replace braking bulb without damaging lens?

Tail light unit is sealed. Can be taken off vehicle with four screws but access to bulbs seems to be from front of unit. How do you pop off the lens cover to replace braking bulb without damaging lens?

Access is from the rear of the tail light assembly. IIRC, you should be able to twist (~1/4 turn I think) and remove the bulb holder for which ever light you are attempting to replace.

Access is from the rear of the tail light assembly. IIRC, you should be able to twist (~1/4 turn I think) and remove the bulb holder for which ever light you are attempting to replace.

Thanks for your thoughts but there is no rear access (Typically, bulbs are removed as you mentioned but not this model . Access must be gained from popping off lens. Need to find out how to accomplish this without breaking lens.

Thanks for your thoughts but there is no rear access (Typically, bulbs are removed as you mentioned but not this model . Access must be gained from popping off lens. Need to find out how to accomplish this without breaking lens.

Did you try removing the two small screws on the back of the tail light assembly?