Our Community is over 1 Million Strong. Join Us.

Stop Feeding Overpriced Junk to Your Dogs!

GET HEALTHY AFFORDABLE DOG FOOD
DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.
CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.
NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME
PROPER NUTRITION FOR ALL BREEDS & AGES
TRY GRAND FUTURE AIR DRIED BEEF DOG FOOD

stripped calliper bolts


fiero_mark
03-31-2005, 11:36 PM
hey, my brakes are locked, so i was taking off the callipers. I got one side off fine, but on the other side, both bolts stripped because they were so rusty. the bolt heads are so small i can't get them with a vice grips or anything, does anyone have any advice on how to get these out? thanks. -mark
84fiero123
04-05-2005, 09:02 PM
if you have a welder handy, mig,arc, antything. and you have enuf room weld a short bolt onto the stub, if your lucky you my be able to get them out but before you try to remove them if you can get a bolt welded on them pb blast the shit out of them for a day, several times tapping them every time u blast them. good luck, your gonna need it
mruwka
04-07-2005, 07:41 PM
I know that you can drop in a 3800 V6 in it but can i still leave the manual trans that it already came with..???? or do i have to switch to an automatic that the 3800 would come with...????
please help...

Add your comment to this topic!