V-Tec
Ev0-213
03-31-2002, 10:01 AM
i Was wondering if you can put a 98 integra gsr v-tec engine in a 2002 lancer oz rally:frog:
Moppie
03-31-2002, 10:17 AM
Nice idea, but not worth the hassel.
You would need custom mounts for both engine and g/box. a custom loom to plug into the b18c ECU, as well as custom axles.
It would be far far easier to either find a Mitisi MIVEC engine, (like VTEC but not quite as good) or use a GSR or EVO engine.
The GSR engine should be a bolt in, while the EVO engine will be pretty close.
You would need custom mounts for both engine and g/box. a custom loom to plug into the b18c ECU, as well as custom axles.
It would be far far easier to either find a Mitisi MIVEC engine, (like VTEC but not quite as good) or use a GSR or EVO engine.
The GSR engine should be a bolt in, while the EVO engine will be pretty close.
Ev0-213
03-31-2002, 10:30 AM
i used to want one but they are like 4000, and that dont include some shit.... yuo think an 95 eclipse gst turbo engine will fit
HondaAdict
03-31-2002, 10:37 AM
If you really want to you could. Try It!
lanceroz17
03-31-2002, 11:49 PM
how about a juciey evo gsr engine that would make 320hp .
Ralliart
04-01-2002, 04:39 AM
the eclipse motor will fit and so will the evo engine but the evo swap will need more than a few modifications to fit it....and it wont produce 320hp....try maybe 250-260hp which is only an estimate.
lancerz
04-02-2002, 02:32 AM
You're better off with a Lancer GSR engine from somewhere/somecar then V-TEC.
Automotive Network, Inc., Copyright ©2026