96 Dodge 3500 Cruise Control Problem
03-29-2005, 12:26 PM
Have 5 speed Manual trans., V-10 engine, Cruise button pushed, light comes on, but when SET button pushed, CRUISE won't activate. Everything is connected @ Cruise unit under battery.Appreciate any ideas. [email protected]
1thunder
03-29-2005, 09:04 PM
make sure you have manifold vacum at servo under battery tray
04-15-2005, 01:12 PM
make sure you have manifold vacum at servo under battery tray
1thunder was absolutely correct, THANKS! Reason should be noted tho: the vacuum hose goes under the battery & acid ate thru it.(Could happen to MANY!) Spliced the burned section with quality, slightly larger hose & problem solved. Had to R&R battery + batt. tray to accomplish this. Thanks again. Ben
1thunder was absolutely correct, THANKS! Reason should be noted tho: the vacuum hose goes under the battery & acid ate thru it.(Could happen to MANY!) Spliced the burned section with quality, slightly larger hose & problem solved. Had to R&R battery + batt. tray to accomplish this. Thanks again. Ben
Automotive Network, Inc., Copyright ©2026