1g tach install problems....

obviously the problem im having is where to hook the green wire too....

per apexi i should hook it to the 1&4 coils wire on the ecu

according to a vfaq safc install i should hook it to the barometric pressure wire at the ecu



i have no idea what to do....any help is appreciated, i know there are people out there w/ a 1g w/ an aftermarket tach...PLEASE HELP!!!

Can't you just hook it up to the coil wire under the hood? That is how I always do it.

that would work.....except it has two coils, so if i hook to to one coil it only read 2 cylinders..

when in doubt. go with the DSM specific install directions. hook it to the wire that the vfaq says.