Camber Kits

I'm looking to buy a camber kit for my 91 CRX Si. I put in some Tein coilovers and now the camber is WAYYYYY neg.


Who likes what and why? :)

Also, found a good article for those who are interested in what kit does what.

http://www.automotivearticles.com/article_59.shtml

Bump - Nobody uses a camber kit???

Anyway, I'm looking at buying a ebay dropzone kit. Cheap, but most of the kits on there are knockoffs of established products anyway. Total will be about a hundred bucks. What do u guys think?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7964719740&category=33581
This is the second kit I bought I think this is a much better kit than the INGALLS style. I had major problems with the ingalls allways coming loose and finally broke one of the bolts. Oh ya I did buy them from DROPZONE there crap.

So IMO the block style(the above link) is the best way ya you will never get your camber perfect but I have 10,000 miles on my current tires and no uneven wear.

but how are they adjustable? it seems like it has one position.

i use the SPC camber kit...best one for hondas....but it costs over $150....best one recommended by all HTers.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7964719740&category=33581
This is the second kit I bought I think this is a much better kit than the INGALLS style. I had major problems with the ingalls allways coming loose and finally broke one of the bolts. Oh ya I did buy them from DROPZONE there crap.

So IMO the block style(the above link) is the best way ya you will never get your camber perfect but I have 10,000 miles on my current tires and no uneven wear.

I just bought that same one awhile ago, waiting for it to arrive.
It is EXACTLY the same as the Progress Tech Kit which sells for around 230$$

Dropzone is junk

Ingalls or SPC

for the rear you don't really need kits if you can get strong enough bolts - grade 8
http://home.earthlink.net/~civicex95/rearcamber.html
just dont use cheap bolts as shown on the site.

you can just use washers for the rear...don't need a kit for that

I have the one from ingalls and they do fine for me !