toe in calculation
pocketmonkey
03-24-2005, 07:43 AM
i want to know if there is a universal equation to convert the toe in/out measurements in degrees to a metric or standard measurement. i've been looking forever and noone knows anything about it.
CapriRacer
03-24-2005, 10:19 AM
The formula is:
Toe in = tire diameter* tan(toe angle)
Be careful programming this into an Excel spreadsheet as Excel assumes the angle you put in is in radians.
Angle in radians = Pi * (angle in degrees)/180
Hope this helps
Toe in = tire diameter* tan(toe angle)
Be careful programming this into an Excel spreadsheet as Excel assumes the angle you put in is in radians.
Angle in radians = Pi * (angle in degrees)/180
Hope this helps
CapriRacer
03-24-2005, 11:10 AM
Opps!!!
Forgot to tell you that this formula is PER WHEEL, not total toe.
Forgot to tell you that this formula is PER WHEEL, not total toe.
Automotive Network, Inc., Copyright ©2026