Programing remote for 97
macha22
03-23-2005, 10:36 AM
I have a 97 ford explorer. I bought it about a year ago and it did not come with a remote control . I just use the keyless entry padave . I just bought two remote controls for explorer 97 on ebay, but I have no idea how to program these with the car. I'd really appreciate if someone could help me out! Thanks... Allison
blakrj
05-19-2005, 11:48 PM
...as long as it had the option fitted, try this:
1. All vehicle transmitters must be reprogrammed together.
2. Place key in ignition and rapidly turn from OFF to ON positions 8 times within 10 seconds finishing in ON position. Do not engage starter.
3. If doors do not automatically lock/unlock, repeat step 2.
4. Press one button on every transmitter. Turn ignition to LOCK and remove key. Check the operation of all transmitters.
Positions of the Ignition
ACCESSORY LOCK – allows key insertion/removal.
OFF – shuts engine off.
ON – all electrical circuits operational. Warning lights illuminate. Key position when driving.
START – engages starter.
1. All vehicle transmitters must be reprogrammed together.
2. Place key in ignition and rapidly turn from OFF to ON positions 8 times within 10 seconds finishing in ON position. Do not engage starter.
3. If doors do not automatically lock/unlock, repeat step 2.
4. Press one button on every transmitter. Turn ignition to LOCK and remove key. Check the operation of all transmitters.
Positions of the Ignition
ACCESSORY LOCK – allows key insertion/removal.
OFF – shuts engine off.
ON – all electrical circuits operational. Warning lights illuminate. Key position when driving.
START – engages starter.
Automotive Network, Inc., Copyright ©2025