swapping doors?
YZ125rider21
03-21-2005, 01:35 AM
hey i think i know the answer but i just wanna ask you guys...will a 88 crx si door fit on my 90 crx si? i wanna get the doors with out the seat belts on door...cause i switched over to 4 point harnesses and looks tacky having the seat belt wholes on doors and yes seat belts on door i took them out...
91civicDXdude
03-21-2005, 10:45 AM
yes they will fit
YZ125rider21
03-21-2005, 05:52 PM
well i getting told they wouldnt fit?...so you are sure before i go buy a pair that they wil fit?
doug294
03-21-2005, 10:17 PM
How much are you paying for the doors? It might be cheaper to just have your panels recovered.
YZ125rider21
03-21-2005, 10:57 PM
thing is i dont want the seat belt mounts on door anymore....its the wholes i am worried about...
DirtyD777
03-21-2005, 11:13 PM
I have a si door on my drivers side on my dx..fit's puuurfect
YZ125rider21
03-22-2005, 03:01 AM
ya but i wanting to swap a 88 door to my 90 door just to get rid of seat belt mount holes
doug294
03-22-2005, 08:42 AM
If you have them recover it they can take the holes "out". I have already checked into it when I switch to my 4 points.
aftershock192
03-23-2005, 09:32 AM
i would love to know this to because the 88 hf doors are lighter do to the lack of seat belts on them
EF You
03-24-2005, 08:47 PM
ok, everyone, stop confusing each other.
you can put 88-89 style doors on a 90-91 car, but they have to be from the same bodystyle. IE: CRX to CRX, hatch to hatch, sedan to sedan. CRX doors do not work on the hatch. the angle at the top is more curved, and the glasses arent even interchangable.
the door panels do swap over between CRX and civic, provided they are from the same grouping (88-89 and 90-91). you can put the 90-91 panels on an 88-89, but you will have the large bulge at the bottom and the slot at the top for the seatbelt system. you could also put the 88-89 panel on the 90-91 door, but only after removing the seatbelt system.
for people with racing harnesses in a 90-91 car, it makes sense to put 88-89 doors on them to lose weight and to make the interior look a lot cleaner. keep in mind that the window glass for the 88-89 is about 2 inches longer than the 90-91, and that the outer pillar trim is a lot skinner on the 88-89.
i think that about clears things up...
you can put 88-89 style doors on a 90-91 car, but they have to be from the same bodystyle. IE: CRX to CRX, hatch to hatch, sedan to sedan. CRX doors do not work on the hatch. the angle at the top is more curved, and the glasses arent even interchangable.
the door panels do swap over between CRX and civic, provided they are from the same grouping (88-89 and 90-91). you can put the 90-91 panels on an 88-89, but you will have the large bulge at the bottom and the slot at the top for the seatbelt system. you could also put the 88-89 panel on the 90-91 door, but only after removing the seatbelt system.
for people with racing harnesses in a 90-91 car, it makes sense to put 88-89 doors on them to lose weight and to make the interior look a lot cleaner. keep in mind that the window glass for the 88-89 is about 2 inches longer than the 90-91, and that the outer pillar trim is a lot skinner on the 88-89.
i think that about clears things up...
YZ125rider21
03-25-2005, 01:52 AM
thanks man just the answer i was looking for
honda_luvr_2000
03-25-2005, 02:17 AM
ok, everyone, stop confusing each other.
you can put 88-89 style doors on a 90-91 car, but they have to be from the same bodystyle. IE: CRX to CRX, hatch to hatch, sedan to sedan. CRX doors do not work on the hatch. the angle at the top is more curved, and the glasses arent even interchangable.
the door panels do swap over between CRX and civic, provided they are from the same grouping (88-89 and 90-91). you can put the 90-91 panels on an 88-89, but you will have the large bulge at the bottom and the slot at the top for the seatbelt system. you could also put the 88-89 panel on the 90-91 door, but only after removing the seatbelt system.
for people with racing harnesses in a 90-91 car, it makes sense to put 88-89 doors on them to lose weight and to make the interior look a lot cleaner. keep in mind that the window glass for the 88-89 is about 2 inches longer than the 90-91, and that the outer pillar trim is a lot skinner on the 88-89.
i think that about clears things up...
in light of u'r statement, u r right but not fully detailed. all 88's have seat belts on the b pillar and not the door. only about a quarter of the 89's have the belts on the b pillar. the other 3/4 have them on the doors like the 90 and 91. it might even be as many as all of the 89 from about the mid of Feb 88 thru the rest of the years production. as for everything interchanging like u said... yes it will
as a side note. if u really want it to be clean, also get the door sill molding from an 88 or EARLY 89, that runs along the side of the seat that u only see when the door's open. if not, u'll have the bare spot where the plastic covered bracket was. just making sure nothin is forgotten.
you can put 88-89 style doors on a 90-91 car, but they have to be from the same bodystyle. IE: CRX to CRX, hatch to hatch, sedan to sedan. CRX doors do not work on the hatch. the angle at the top is more curved, and the glasses arent even interchangable.
the door panels do swap over between CRX and civic, provided they are from the same grouping (88-89 and 90-91). you can put the 90-91 panels on an 88-89, but you will have the large bulge at the bottom and the slot at the top for the seatbelt system. you could also put the 88-89 panel on the 90-91 door, but only after removing the seatbelt system.
for people with racing harnesses in a 90-91 car, it makes sense to put 88-89 doors on them to lose weight and to make the interior look a lot cleaner. keep in mind that the window glass for the 88-89 is about 2 inches longer than the 90-91, and that the outer pillar trim is a lot skinner on the 88-89.
i think that about clears things up...
in light of u'r statement, u r right but not fully detailed. all 88's have seat belts on the b pillar and not the door. only about a quarter of the 89's have the belts on the b pillar. the other 3/4 have them on the doors like the 90 and 91. it might even be as many as all of the 89 from about the mid of Feb 88 thru the rest of the years production. as for everything interchanging like u said... yes it will
as a side note. if u really want it to be clean, also get the door sill molding from an 88 or EARLY 89, that runs along the side of the seat that u only see when the door's open. if not, u'll have the bare spot where the plastic covered bracket was. just making sure nothin is forgotten.
xxxxxxxx
03-25-2005, 10:28 AM
hey i think i know the answer but i just wanna ask you guys...will a 88 crx si door fit on my 90 crx si? i wanna get the doors with out the seat belts on door...cause i switched over to 4 point harnesses and looks tacky having the seat belt wholes on doors and yes seat belts on door i took them out...
check out my doors man..
http://images.autotrader.com/images/2005/3/25/177/285/1347979982.177285081.IM1.MAIN.565x421_A.562x421.jp g
check out my doors man..
http://images.autotrader.com/images/2005/3/25/177/285/1347979982.177285081.IM1.MAIN.565x421_A.562x421.jp g
regsize
03-25-2005, 01:20 PM
check out my doors man..
http://images.autotrader.com/images/2005/3/25/177/285/1347979982.177285081.IM1.MAIN.565x421_A.562x421.jp g
dayum....i like them doors dude..how much did you spend on that stupid thing?? ima get mine done like that...
http://images.autotrader.com/images/2005/3/25/177/285/1347979982.177285081.IM1.MAIN.565x421_A.562x421.jp g
dayum....i like them doors dude..how much did you spend on that stupid thing?? ima get mine done like that...
Automotive Network, Inc., Copyright ©2026