installing CAI

do any of you guys know where i can find instructions on installing the AEM short ram intake on my 95 lude? or if possible one of you that knows how to could give me directions . . .
Thanks for your time,

Chall

It's not that hard. There should be instructions in the Driver's maunal on how to take out the factory airbox. The rest you could probably find in the how-to section. I don't have my old Prelude so i can't walk out side and tell you what goes where. Oh and the biggest thing is that you ahve to take the bumper off to get to the resonator. PAIN IN THE ASS! Enjoy.

Alan


Wasn't too helpful huh?

Here is a great link.http://www.lightningmotorsports.com/prelude_cai_install.htm

Its step by step with pix.

well lets see if i can help, first off there are two hoses that u have to disconnect from the engine, one is from the valve's, the other i don't know where it's form but it's on the top right side of the intake box, first off, unscrew the clamp connecting the hose to the throttle body, loosen it, but don't take it off, there should be a cable/hose that has a little hook onto the stock intake, take that off first, now u can move the stock intake, next there are about 4 clasps on the air box that you need to unclasp, once done, u can move it around freely, it's snug in there, so wiggle it a bit and pull hard and the hose and box cover for the intake should come of easily, this will give you enough room to put your short ram in, if u want the rest of the airbox out, there are a few screws that you should see, if not, just pull really hard :), and make sure that you pull down your mudflap on the underside, to see if there are ne screws that you have to undo, thats about it, it's a quick 5 minute install with the short ram, hopefully i helped ya, and i'm pretty sure it'll be the same way as my 92 lude was configured, happy hunting to ya