got a BIG question
jay-bear
03-17-2005, 01:25 PM
HELP............. I want to put a 350 in my grand prix
Is it possible to change a grand prix from a front wheel drive to a rear wheel drive?
:banghead:
Is it possible to change a grand prix from a front wheel drive to a rear wheel drive?
:banghead:
ericvrose
03-17-2005, 01:40 PM
That's an easy one. No. There's no driveshaft tunnel.
BNaylor
03-17-2005, 04:29 PM
Impossible! If you're hung up a 350 c.i.d. rear wheel drive car why don't you just trade it in on a Camaro or Firebird......its more cost effective and reasonable.
jimmytroanoke
03-17-2005, 07:31 PM
HELP............. I want to put a 350 in my grand prix
Is it possible to change a grand prix from a front wheel drive to a rear wheel drive?
:banghead:
Anything is possible! Especially if you want to have 50000 Bucks tied up in a car you cannot get 5k out of! I agree - If you want a RWD car, start with one. If it has to be a Grand Prix buy an '87 or older! I think some of them had Chevy 305s and a 350 will bolt right in!
Is it possible to change a grand prix from a front wheel drive to a rear wheel drive?
:banghead:
Anything is possible! Especially if you want to have 50000 Bucks tied up in a car you cannot get 5k out of! I agree - If you want a RWD car, start with one. If it has to be a Grand Prix buy an '87 or older! I think some of them had Chevy 305s and a 350 will bolt right in!
kustomkid54
03-17-2005, 07:41 PM
HELP............. I want to put a 350 in my grand prix
Is it possible to change a grand prix from a front wheel drive to a rear wheel drive?
:banghead:
Yes you can. We had one on here about 6 months ago that had one in it.
First it is almost a mid engine. Floor and fire wall are rebuilt. Truck is tuded. The guy had a 1998 and had it listed for $28,000.00. That should give you an idea what it will cost you.
Best car to put a 350 in is a Vega (wagon is the best.
Good luck.
Is it possible to change a grand prix from a front wheel drive to a rear wheel drive?
:banghead:
Yes you can. We had one on here about 6 months ago that had one in it.
First it is almost a mid engine. Floor and fire wall are rebuilt. Truck is tuded. The guy had a 1998 and had it listed for $28,000.00. That should give you an idea what it will cost you.
Best car to put a 350 in is a Vega (wagon is the best.
Good luck.
99grandgt
03-17-2005, 07:48 PM
nothing is impossible!!! it can be done...anyways, the 305? bore it over!! it is the same motor as 350. jsut need a crank too!! anyways, fwd has better tq transfer, laws of physics and crap, but it doesnt bite like rwd, laws of physics!! i know, doesnt make sense, but it jsut does!!!
BNaylor
03-17-2005, 08:05 PM
Anything is possible! Especially if you want to have 50000 Bucks tied up in a car you cannot get 5k out of! I agree - If you want a RWD car, start with one. If it has to be a Grand Prix buy an '87 or older! I think some of them had Chevy 305s and a 350 will bolt right in!
If the guys got the time, patience and money more power to him. But I agree with jimmyt about the 80's Grand Prixs. I recall my father had a mid eighties Regal and it had a 305 with the Rochester Quadrajet carb. LM1 or LT1 350 should fit. I believe that it had the TH350 auto tranny which, in my opinion was built like a battleship and many had the 2400 rpm stall speed torque convertor stock.
If the guys got the time, patience and money more power to him. But I agree with jimmyt about the 80's Grand Prixs. I recall my father had a mid eighties Regal and it had a 305 with the Rochester Quadrajet carb. LM1 or LT1 350 should fit. I believe that it had the TH350 auto tranny which, in my opinion was built like a battleship and many had the 2400 rpm stall speed torque convertor stock.
BNaylor
03-17-2005, 08:30 PM
Yes you can. We had one on here about 6 months ago that had one in it.
First it is almost a mid engine. Floor and fire wall are rebuilt. Truck is tuded. The guy had a 1998 and had it listed for $28,000.00. That should give you an idea what it will cost you.
Best car to put a 350 in is a Vega (wagon is the best.
Good luck.
KustomKid 54,
Anythings possible but lets get realistic. For 33K I can get a new Goat with the Corvette LS2 (400 hp), 6 speed manual and rear wheel drive. At least its a Pontiac although from Australia.
28K? Did anybody ever buy it?
First it is almost a mid engine. Floor and fire wall are rebuilt. Truck is tuded. The guy had a 1998 and had it listed for $28,000.00. That should give you an idea what it will cost you.
Best car to put a 350 in is a Vega (wagon is the best.
Good luck.
KustomKid 54,
Anythings possible but lets get realistic. For 33K I can get a new Goat with the Corvette LS2 (400 hp), 6 speed manual and rear wheel drive. At least its a Pontiac although from Australia.
28K? Did anybody ever buy it?
stlwagon
03-17-2005, 09:40 PM
It was out there on Ebay. Not sure if it's still there.
BNaylor
03-18-2005, 08:37 AM
It was out there on Ebay. Not sure if it's still there.
Maybe Jay Leno bought it.....lol.
Maybe Jay Leno bought it.....lol.
vamc
03-30-2005, 02:00 AM
If it was possable to put a 350 in it, you could put stress fractures in the fraim.
jay-bear
04-01-2005, 09:42 AM
I know i know i have big dreams. just love the body on my car. the car takes turns like i have already upgraded the suspention, i can just imagine what it would handle like after upgraded. it really is to bad this year wasnt made in a rear wheel drive. this car bear hug corners.
DarkGP
04-08-2005, 02:41 PM
anything is posible with a cuting torch and a welder i have seen it done (not that i segest doing it) but it was a 94 gtp but the guy used it for a drag car it looked awsome but he slod it for like 33k so im gonna have to go with kustomkid and say buy a corvette if u got mondy burning a hole in ur pocket.
and buy the way if u do try it ur not gonna have near the same handling if u put that huge ancor for a motor in a lite grand prix
and buy the way if u do try it ur not gonna have near the same handling if u put that huge ancor for a motor in a lite grand prix
Automotive Network, Inc., Copyright ©2025