Removing Door Panel

I have to change to power window switch on the driver's side door - does anyone know how to take the panel off? Tried to take it off last night - no luck - I would have started to crack it if I kept prying - even after taking the screws out.

Thanks

I don't have a concord, so I might not be of much help.

But you took the screws out of the door handle area too?

If your trying to take out the power window switch on a 98-04 Concorde, you don't need to take out the door panel, just get a small screwdriver, and pry it out from the door panel. But if you are trying to get the panel off, try taking the screw by the door handle, it's hidden by a little cover in the handle, the door pull handle has a screw covered by the same cover as in the door handle, there are 3 on the bottom edge of the door, two on the recessed area that fits into the dash and you have to remove the speaker grill to remove the last 3 screws that hold it in place. After that, the panel should come off easily.

I just did my panel and thats all you have to do is use a plastic screwdriver to pry out the control section.

I have to change to power window switch on the driver's side door - does anyone know how to take the panel off? Tried to take it off last night - no luck - I would have started to crack it if I kept prying - even after taking the screws out.

Thanks


There ARE screws in it.

See my post about the window...if it'll help you.