'55 Chevy - '58 Chrysler

I have been working on this for a few days now. It is a '55 Chevy.
I chopped the roof off and replaced it with a roof from a '58 Chrysler. All of the door handles and side moldings have been removed and door seams have been filled in. Here are some pictures of this project and another 2 motors that I am building. One is for a '69 Camaro, and the other is for a '41 Willys Street Rod. The motor on the '55 needs to be retouched and so do the Nitros tanks. The plug wires are the wrong scale, but they will be replaced in the near future, along with the valve covers. My signature shows the paint scheme I have in mind.

http://img65.exs.cx/img65/2931/one8ym.jpg

http://img65.exs.cx/img65/1530/two1tl.jpg

http://img65.exs.cx/img65/2699/three0sn.jpg

http://img65.exs.cx/img65/1690/four8sy.jpg

http://img167.exs.cx/img167/3793/five2sc.jpg

http://img167.exs.cx/img167/4499/six1ft.jpg

http://img167.exs.cx/img167/7932/seven5eu.jpg

man thats gonna look awsome i like your way of thinking love the motors and the paint ideas! keep us updated!

Sounds like an awesome project! By the way nice heders! Keep it up!

Man, this looks so cool!! :naughty: And that paint scheme looks awesome to! Keep it commin'!

This is a huge tough-as-nails ride you are building here.
Love the nice clean body lines you have done

Here is an update on one of the motors. I added some fittings the I made from a tut. I found here on the sides of the carbs and added a distributor and correct size wires.

http://img224.exs.cx/img224/5467/update1zy.jpg

That looks awesome so far!!

Of course you will put one of those acre-sized Pro Modified wings on the trunklid, right ;)
Looks very mean!