pionner gm-x372 problem
skeedupbop
03-11-2005, 11:32 PM
hi,
i've been working on my system for some time now, i finally got my deck to work again and started installing new speakers, etc. I have a pioneer deh-6600 deck with 4 6-1/2" ts-a1681r speakers. I have a gm-x372 power amp that is connected properly, i've checked it many times. For some reason though no sound comes out of my two subs. I know the rca, system remote, battery and ground cable are fine because the power light on the amp flashes. When i had first installed the amp the subs worked for two days and then stopped. I don't know what to do, if anyone can offer some advice on how to solve my problem i would appreciate it very much.
thanx in advance,
skeedupbop
i've been working on my system for some time now, i finally got my deck to work again and started installing new speakers, etc. I have a pioneer deh-6600 deck with 4 6-1/2" ts-a1681r speakers. I have a gm-x372 power amp that is connected properly, i've checked it many times. For some reason though no sound comes out of my two subs. I know the rca, system remote, battery and ground cable are fine because the power light on the amp flashes. When i had first installed the amp the subs worked for two days and then stopped. I don't know what to do, if anyone can offer some advice on how to solve my problem i would appreciate it very much.
thanx in advance,
skeedupbop
GScivic7
03-12-2005, 12:03 AM
the light isn't supposed to flash. The amp is in protection mode. It's more than likely you fried something internal.
Automotive Network, Inc., Copyright ©2026