Capella diesel
richer88
03-09-2005, 05:29 AM
My stop lights (brake lights) stopped working after I connected a trailer with defective wiring. I can't find any fuses blown anywhere. Does anybody have any idea where to look? Any clues welcome. Thanks, Don
Eggert
03-09-2005, 10:11 PM
Hi, please post some info on what vehicle you have.
4 pin or 7 pin connector?
On 2001 Yukons both the L/D and the H/D Trailer Wiring have a 20 Amp STOP LPS fuse and a 10 Amp VEH STOP fuse in the Junction Block - Underhood.
Does your Stoplamp Switch still work?
Hope this helps, Eggert :bananasmi
4 pin or 7 pin connector?
On 2001 Yukons both the L/D and the H/D Trailer Wiring have a 20 Amp STOP LPS fuse and a 10 Amp VEH STOP fuse in the Junction Block - Underhood.
Does your Stoplamp Switch still work?
Hope this helps, Eggert :bananasmi
clearviewpools
03-23-2007, 06:56 PM
i figured if i wrote something i might get a reply - am trying to figure out how to post a thread - trying to find out what system will go in my 2006 sierra 3500 series - want to get in dash monitor but am told it's 1/12 din or 2 din - don't know what it means - want to post a thread!!
maxwedge
03-23-2007, 08:21 PM
Go to the main Yukon page and use thread starter upper l/s.
Automotive Network, Inc., Copyright ©2025