Need to replace rust fuse block- '68 El Camino

Greetings all. Newbie here with a need for some information.

I have been restoring/customizing a 1968 Elky, and found the fuse panel to be rusted and potentially shorting across. I am NOT, I repeat NOT a wireologist and would like suggestions on replacements please.

Thanks, in advance.

BB
PS-once completed, this car and it's twin '02 Custom Harley will be for sale. Pics and info by request. Thx

If you can't find a donor car with one in good shape you can replace it with a later style unit from someone like this outfit:
http://performance.alternatefuelsracing.com/painless.html

Thanks for your guidance. I called Painless first, but they don't sell retail. I'll call these folks tomorrow, 'cause all the donors are exhausted here in San Diego.

Thanks for your guidance. I called Painless first, but they don't sell retail. I'll call these folks tomorrow, 'cause all the donors are exhausted here in San Diego.


https://www.opgi.com/GateChev4.asp

Go here then look down left side for electrical and battery. Then look for painless wiring. They have 2 different fuse blocks. 1 is an 18 or 16 lead for $149.00 the other is a 12 lead for $99.00 .

Many thanks and sharp car!!!

BB

Here's another outlet if you want it to be stock and correct. I replaced all the harness's in my 68 Chevelle. The company makes the exact wire harness to match the factory, everything matches and lines up correctly.
M&H electric fabricators-can be found @ www.wiringharness.com
:smokin:

You help is greatly appreciated. I'll give them a call, as I wish to stay original. For no other reason, but to plug and play and not have to figure other crap out. I HATE ELECTRICAL!!!!
Thx,

BB