New gauge coming soon

This will be the next gauge im going to buy or for some the only gauge you will need and it also read's the DTC codes :biggrin: you wouldnt need a scanner.This gauge is for OBDII car's and is going to also be released in red soon,but for now it is blue.It will be 206 bucks shipped and is plug and play !

~Larry~

http://www.aeroforcetech.com/images/blue_blakwebpic2.jpg


The Interceptor is capable of displaying the following parameters. Not all are
supported be every vehicle so there is no guarantee that each individual vehicle will
have every one of these available. If the vehicle is broadcasting the parameter, it WILL
be available for display.

* RPM

* MPH

* Intake Air Temperature

* Mass Air Flow Sensor Frequency

* Mass Air Flow Sensor (lb/min.)

* Engine Coolant Temperature

* Injector Pulse Width (bank 1 and 2 if supported)

* Long Term Fuel Trim (bank 1 and 2 if supported)

* Short Term Fuel Trim (bank 1 and 2 if supported)

* O2 Sensor Voltage (bank 1 and 2 if supported)

* Manifold Pressure in PSI (Boost pressure for turbo/supercharger
applications)

* Ignition Advance

* Knock Retard

* Engine Run Time

* Battery Voltage

* Transmission Temperature

* Idle air Control Counts

* Throttle Position Percentage

* Throttle Position Voltage

* Engine Load

The Interceptor gauge has a 52mm (2 1/16") diameter and will fit in all standard gauge
pods of this size. A 3.5' cable is included with appropriate OBD2 connector. An optional
splitter cable is available to connect two Interceptors at one time.

Accessing the function menu involves simply pushing both buttons simultaneously. From
the menu you can enter a recording mode, where the Interceptor will return to normal scan
mode but will start recording the displayed data automatically when the throttle exceeds
70%. Approxoximately 35-40 seconds of data will be stored. Back at the menu screen you
can choose to replay the stored data on the Interceptor display. From the same menu
you can also instruct the unit to display all stored trouble codes and then clear them if
desired.

Power is supplied to the unit by the OBD2 port, so no additional wiring is needed, simply
plug-and-play!
Warranty

Larry- where did you find it?

Larry- where did you find it?

I don't care when he found it. I want to know when it's coming out in red.
Will order that day.

Opps,I was so excited when I seen it and wanted to share the information with everyone,I forgot to included the link. :lol:

www.aeroforcetech.com/

doesn't it say in the description that it reads the trouble codes? aren't those the DTC?

doesn't it say in the description that it reads the trouble codes? aren't those the DTC?

That does it. Just made it a real must.

doesn't it say in the description that it reads the trouble codes? aren't those the DTC?

Thank's,I fixed it.Thats what I should have said :lol2: That it does read's/clears codes and you dont need a scanner.

Thank's,I fixed it.Thats what I should have said :lol2: That it does read's/clears codes and you dont need a scanner.

Oh sure, NOW you tell use.

Oh sure, NOW you tell use.

Thats why I was so excited .

Thats why I was so excited .

It doesn't take much lately. We need to talk.

That is a great find. Will have to have that. It's less then buying a scanner.

Ive been needing a scaner for sometime now,plus you dont need all the other gauges,like tranny,water temp,boost which would fill up a pod very quickly.Just get the 2 gauge pod and have oil pressure and the Interceptor.

Ive been needing a scaner for sometime now,plus you dont need all the other gauges,like tranny,water temp,boost which would fill up a pod very quickly.Just get the 2 gauge pod and have oil pressure and the Interceptor.

Let me know when they come out in red. I'll have one. If you could get enough guys that want one, MAYBE we could get a discount.

Let me know when they come out in red. I'll have one. If you could get enough guys that want one, MAYBE we could get a discount.


I would definetly be up for doing that.


So this really is an all in one gauge. is there any reason to have more that one if you have this one?

maybe if you wanted to monitor more than 2 readings i guess...

Ive been needing a scaner for sometime now,plus you dont need all the other gauges,like tranny,water temp,boost which would fill up a pod very quickly.Just get the 2 gauge pod and have oil pressure and the Interceptor.


Yeah...didn't see that at first, my bad

if your go onto the images page on this gauges website and watch the video, while the numbers are changing quickly they seem to blur into one another so you cant even tell what it says. I e-mailed the guy about this and he said it was just the camera thats doing this bluring. when it comes out in red i am getting one also

if your go onto the images page on this gauges website and watch the video, while the numbers are changing quickly they seem to blur into one another so you cant even tell what it says. I e-mailed the guy about this and he said it was just the camera thats doing this bluring. when it comes out in red i am getting one also


I saw that to, i figured it was just refresh rates between the camera, and Interceptor.

Also gives MPH. That's nice when you bottom out the speedo, you can say, "I'm doing --- and know.