sr20det

i need to know what all i need to swap a sr20det into my 89 nissan 240sx iknow that i need a engine and tranny but what also do i need for example ecu harnesses or what some one please help!

you need to be able to READ ^^ check the FAQ

engine, tranny, uncut wireharness, ecu, ignitorchip are the MAIN things but I do agree you need to take a LITTLE VERY LITTLE time and maybe read at least 1 post on the forum before asking questions because I would guess that question has been answered at least 100 times or more in the past year

thats probably one of the most common questions. skim the faq for sr details and use the af search to find other threads. they're endless. do that first then ask questions. its amazing what 20 minutes of reading can do for you

first off go read the faq

you can also go to www.srswap.com [heavythrottle]

they have a really good faq

off the top of my head i would say that you need the ECU, harness, motor, and the power steer components from a DOHC KA motor, if you want to keep the a/c you either need custom lines or to make a mounting bracket to hold the SOHC compressor, a good free flowing exhuast, Z32 maf to free up intake flow[ecu needs to be done to allow this i used an SAFC2], good intake filter, Z32 fuel filters can be used in the install

i would also throw in replacing the bushings, there are a few options, all new mounts would be a good idea, walbro fuel pump would be nice, changing the guage cluster could be done just so the red line is raised not important


www.splparts.com
www.srparts.com

FAQ you.