HP????? 93 5.0L Motor

I just bought a 91 Notch 5.0 5spd, w/ 93 GT Motor and drivetrain. I read it had about 205hp stock, i was wondering if someone could ballpark for me the hp after the mods it has had mabey even a torque guess...

B&M Short Shifter
BBK CAI
AC Delete
BBK Springs
BBK Headers
Off-Road H-Pipe
Magnaflow full exhaust
MSD Ignition & Wires
Comp Chip
Subframe Conectors

mabey more.... that is just wat i saw...

I just bought a 91 Notch 5.0 5spd, w/ 93 GT Motor and drivetrain. I read it had about 205hp stock, i was wondering if someone could ballpark for me the hp after the mods it has had mabey even a torque guess...

B&M Short Shifter
BBK CAI
AC Delete
BBK Springs
BBK Headers
Off-Road H-Pipe
Magnaflow full exhaust
MSD Ignition & Wires
Comp Chip
Subframe Conectors

mabey more.... that is just wat i saw...

Conservativly somewhere between 210-225hp at the crank. But you won't know till you get it on the rollers...

At the very max I'd say 250 hp and 350 lb/tq.
At the very minimum I'd say 235 hp and 335 lb/tq.

I just bought a 91 Notch 5.0 5spd, w/ 93 GT Motor and drivetrain. I read it had about 205hp stock, i was wondering if someone could ballpark for me the hp after the mods it has had mabey even a torque guess...

B&M Short Shifter
BBK CAI
AC Delete
BBK Springs
BBK Headers
Off-Road H-Pipe
Magnaflow full exhaust
MSD Ignition & Wires
Comp Chip
Subframe Conectors

mabey more.... that is just wat i saw...



I just found out it has underdrive pulley as well

At the very max I'd say 250 hp and 350 lb/tq.
At the very minimum I'd say 235 hp and 335 lb/tq.
No way, too high.

I'm going with silverstangs, these are more of the numbers you will see with the very few minor bolts on you have.

I'd say you will pick up about 25 at the crank. I did about the same on my 91 LX and got about that. Save some money for a MAF, upper and lower and some GT40P heads for some real power.