Cd Player Wont WORK! HELP

SO I changed it out and bought the wire kit for it. Plugged in the cd player and it didnt power on :( So I said lets see I plugged the old one back in and it didnt power on. So I started to look at the fuses and checked them the best I could, the chart sucks! Any suggestions on what to do next?

hopefully you didnt fry anything when installing the 1st one....

hopefully you didnt fry anything when installing the 1st one....



What would I have fried?

What would I have fried?

i wouldnt know where to begin, im not too good with wiring/ car electronics

i dont think you would have fried anything. im betting its a fuse. just take them all out.

Well there are many things you could check. First off did you splice any of the wires or did you just use the aftermarket harness? To check fuses, there should be a fuse box with I think 2+ fuses that are stereo related, in the driver side, near the pedals, as well as one in the engine compartmen fuse box. Your boxes should have some sort of diagram or guide on the lid that will tell u which fuse is which. If this u cant find a blown fuse or need more help post, or send me an PM.

If you're sure it's not a fuse, I woud start by checking voltages at the connector. Did you do anything to the ground? If you did any splicing, double check them. I rarely use crimps, I prefeer to solder & heat shrink.
Yellow=12v always hot
Red=12v when the key is switched to Acc.