Two Questions

my first one is i have 19lb injectors if i were to get 24lb injectors would it realy do any thing like give my horse power. and could i do it on a stock fule pump.

My next one is i have a boost gauge were am i soppose to put the little tube at, it gave instuctions, but they dont realy tell me.

Help please thank you.

Just changing to 24# injectors does little to nothing. What are your other mods?

i have cold air intake, new bbk air intake manfold 75mm Throttle body, msd intion, msd intion coil, 3g 200amp Alt, ill be getting this engie next year http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=387876&prmenbr=361
with a pro charger super charger, see i dropped one of my old injectors the other day and the little plastic thing on the bottom broke a little bit. and i dont know if its going to work, so i was thinking since im going to have to get new and bigger injectors on the new engien, i should just get them now, but i dont know if my old fule pump will be able to handle them, you know what i mean

stock injectors can handle over 300 hp. Stockers will be fine for your time being, but adding higher flow injectors may cause the motor to run richer without and adjustable fuel pressure regulator, on an otherwise fairly stock motored car.

ic ok what about the boost gauge

bump

ic ok what about the boost gauge

What about it?

"My next one is i have a boost gauge were am i soppose to put the little tube at, it gave instuctions, but they dont realy tell me."

any one.

Is there an open port on the intake manifold? or off the tree on the firewall?

Is there an open port on the intake manifold? or off the tree on the firewall?
There is a port underneath the intake that can be sliced into.

ok ic.