Radiator Drain Plug???

I am trying to replace the thermostat on my Camaro but I can't find the "drain cock" (I know lots of jokes are about to be posted) as the Chiltons manual refers to it. Also how to you bleed the cooling system? Thanks

This is the Z28 but the 3.4 is in the same spot http://shbox.com/1/drain_valve.jpg

And I am lazy so read how I described to do it to thiis guy http://www.automotiveforums.com/vbulletin/showpost.php?p=2799210&postcount=5

Good Luck.

John

Fill it up til no more air bubbles pop up, then squeeze the upper radiator hose and fil slowly. this will draw more coolant in. The start the car with the cap off while quickly adding coolant then once it starts to over flow quickly put the cap back on and fill the reservoir. That method has always worked for me on cars that don't have bleeder screws. Good Luck.

John

the joys and wonders of copy and paste.

Thanks for the quick reply Formula. Under 20mins, not bad...

No problem. Thats why I am a god among mods.(and for the record way under, 13 minutes with linked images)

John