Need to know what this wire set and connector plug in

I have two wires going into a red connector and they are not plugged into anything...they come up from the rear of the engine near the coils and were just hanging there not plugged in to anything...I have a picture of them if you need to see it...I just want to make sure they aren't supposed to be going somewhere. Thanks

That may help.
You know there are wires that go nowhere on MOST cars. May be for something that you don't have.

http://img.photobucket.com/albums/v425/kustomkid54/useless.gif



http://img.photobucket.com/albums/v425/kustomkid54/Part2023.jpg



I have two wires going into a red connector and they are not plugged into anything...they come up from the rear of the engine near the coils and were just hanging there not plugged in to anything...I have a picture of them if you need to see it...I just want to make sure they aren't supposed to be going somewhere. Thanks

Speaking of pictures, Kid do us all a favor and use this picture. Getting tiresome scrolling past a picture of your car that is 3/4's parking lot.

http://24.219.100.19/part2023.jpg

How about if I send you the rest, you can make them smaller?

http://img.photobucket.com/albums/v425/kustomkid54/Jims1.jpg


Speaking of pictures, Kid do us all a favor and use this picture. Getting tiresome scrolling past a picture of your car that is 3/4's parking lot.

http://24.219.100.19/part2023.jpg

Speaking of pictures, Kid do us all a favor and use this picture. Getting tiresome scrolling past a picture of your car that is 3/4's parking lot.

Id like to know how to down size some of mine...How can I do it???

Remember im an old man and im stupid when It comes to doing that kind of stuff on a PC.Also how do people take screen shot's ..Thanks !


~Larry~

u for real L ??

im just using the crop tool on Photoshop cs

u for real L ??

Yep :)

Well,I dont have photoshop.So that answered that question.

Thanks

I don't know either. But if I list 4 or 9 maybe Ripn can shoot them back. That would be cool.


http://img.photobucket.com/albums/v425/kustomkid54/Part2025.jpg



Id like to know how to down size some of mine...How can I do it???

Remember im an old man and im stupid when It comes to doing that kind of stuff on a PC.Also how do people take screen shot's ..Thanks !


~Larry~

I have that. But it's not loaded.



u for real L ??

im just using the crop tool on Photoshop cs

Larry,
Need PS? I can send it with your tail lights.


http://img.photobucket.com/albums/v425/kustomkid54/Jims1.jpg



I have that. But it's not loaded.

How's this? Found a faster program the CS.
Also removed all the big ones,


http://img.photobucket.com/albums/v425/kustomkid54/JimsGTX008.gif




u for real L ??

im just using the crop tool on Photoshop cs

too big dude, sorry

plus the resolution is all messed up because u tried to blow it up.

Sorry Rip,

But just cropped them, all that's all. When those pictures were taken I shot them at 1 mp. Camera goes to 8mp. Knew I was going to list them here. That's why I didn't mess with them. AND never tied to blow them up.

http://img.photobucket.com/albums/v425/kustomkid54/JimsGTX007.gif



too big dude, sorry

plus the resolution is all messed up because u tried to blow it up.

#1, maybe tach wires if your car doesnt have a tach.

#2. not only can you crop the picture in photoshop cs, but if you click the image toolbar, you can click "image size" and scale it down. and save it in a different jpg compression so that it is even faster to load on the web. or you can send your stuff to me and i will scale em down for you and send em back.

I do have a tach but, it works fine...

Everything on the car working fine? I still say it's a hook up for GM test eq. or something that maybe on other cars but not yours.


http://img.photobucket.com/albums/v425/kustomkid54/JimsGTX005.gif



I do have a tach but, it works fine...

i have an 89 grand prix and there is a plug there that has a red connector on it plugs in at the back near the top by the fire wall

ambient air temp sensor

ambient air temp sensor

no no is a fuel injector plug ;)

Id like to know how to down size some of mine...How can I do it???

Remember im an old man and im stupid when It comes to doing that kind of stuff on a PC.Also how do people take screen shot's ..Thanks !


~Larry~


To do a Screen Shot, press Ctrl and Print Screen at the same time when the image you want is on the screen. Ctrl is on the bottom left of the keyboard or the bottom right under the Enter key. Print Screen is on the top row by the F# buttons, to the right.

Just in case you hadn't figured it out yet.

i will look and tell you where they connect on my car and ill figure out what they connect to i will post an answer tomorow for you

To do a Screen Shot, press Ctrl and Print Screen at the same time when the image you want is on the screen. Ctrl is on the bottom left of the keyboard or the bottom right under the Enter key. Print Screen is on the top row by the F# buttons, to the right.

Just in case you hadn't figured it out yet.

Big-L: another way you can do this is
1. open your Windows paint program
2. Then bring up the screen you want the pic of and hit the Print Screen
Key
3. Go bck to the paint program,under file select paste.

After that you can play around with it and save it to differant formats.

Id like to know how to down size some of mine...How can I do it???

Remember im an old man and im stupid when It comes to doing that kind of stuff on a PC.Also how do people take screen shot's ..Thanks !


~Larry~


Digressing from the topic here but I feel the need to help Big-L in any way I can (considering how much he helps everyone else).

Photoshop CS is a big and powerful program and way overkill if all you want to do is resize and crop some pictures. Try downloading this...

http://downloads-zdnet.com.com/3000-2192-10021962.html

Infranview is one of many simple picture editing tools. Here are the basics you're looking for...

Rezising the picture -
Once you open the picture [file-->open-->(choose the picture)] you can resize it by clicking [image-->resize/resample-->(choose size)]. There you can either specify the size or simply change the percentage from the original.

Cropping the picture -
Once you open the picture [file-->open-->(choose the picture)] you can crop it (trim the picture down buy cutting off the outside borders). Simply select the area you want to keep. Do this by first selecting the part you want to keep (click then while holding the button down drag to the shape you want). The lines that make the square are where the picture will be cut. Now click [edit-->crop selection]. You're done.

If at anytime you mess it up, just click [edit-->undo] to undo what you just did. Once you're satisfied with the results... save the file [file-->save as]. By "save as" you give it a new name which keeps the original unchanged.

Hope this helps :-)