window motor
JKdonger
03-19-2002, 02:00 AM
Can someone tell me how to take out the power window motor once I have removed my door panel. Where is it and how to lube the mechanisms.
Blue93G20
03-19-2002, 02:33 AM
Honestly there is way too much to explain and too much confusing shit. I've done it and once you know what your doing its not that hard but, i wouldn't know where to start explaining.
JKdonger
03-19-2002, 02:39 AM
Is it that thing with 3 bolts bolted on the door? Cause if it is, I unbolted it and it just hanging there suspended by--I don't know. I really want to lube it up cause my window is kinda rolling up slow, but on the way down its ok.
DaPCWiz
03-19-2002, 09:26 AM
My front passenger side window has started rolling up *really* slow, I think I might be trying to do the same thing very soon... I noticed it yesterday, when I pulled up next to my friend at a light, and rolled down the window to talk to him, he was able to roll up his window, back down, and up again by the time mine made it up :(
P11GT
03-19-2002, 07:26 PM
it could also be caused by low voltage/current in other words, too much current drain elsewhere on the car at the time. try reving the engine when you roll down the window, see if it speeds up, classic sign.
Blue93G20
03-19-2002, 09:55 PM
Originally posted by JKdonger
Is it that thing with 3 bolts bolted on the door? Cause if it is, I unbolted it and it just hanging there suspended by--I don't know. I really want to lube it up cause my window is kinda rolling up slow, but on the way down its ok.
Ok after you undo those bolts, i had to undo the for bolts holding that melt guide onto the door. Once these were out i had to munipulate the window and the motor assembley around to be able to pull it apart. God i wish i had a camera....
Is it that thing with 3 bolts bolted on the door? Cause if it is, I unbolted it and it just hanging there suspended by--I don't know. I really want to lube it up cause my window is kinda rolling up slow, but on the way down its ok.
Ok after you undo those bolts, i had to undo the for bolts holding that melt guide onto the door. Once these were out i had to munipulate the window and the motor assembley around to be able to pull it apart. God i wish i had a camera....
JKdonger
03-20-2002, 12:25 AM
"God i wish i had a camera"....I hear that 'cause I ain't got no idea what you're talkin' about. All I know is that I can reach my hand in the metal gaps of the door and feel the window motor hanging there. At this point, I am not sure what to disconnect, unscrew, twist, or what. I don't think my motor is broken because today I fiddled with the window switch and it miraclously rolled down. Don't know whats up with that, anyhow, I would still like to lube the motor parts for the hell of it.
Automotive Network, Inc., Copyright ©2025