Dual SE 15 ported box question
Powerefx
02-11-2005, 10:01 PM
Hey guys
Do yall think 5.8 Cuft^2 is enough for two se 15s at 32hz tuniing? SHould i devide the box throught the middle with another mdfboard for seperate cabins? Should i just construct a single large prot, or two ports for each? What sqin area should i use for the ports?
Do yall think 5.8 Cuft^2 is enough for two se 15s at 32hz tuniing? SHould i devide the box throught the middle with another mdfboard for seperate cabins? Should i just construct a single large prot, or two ports for each? What sqin area should i use for the ports?
sr20de4evr
02-11-2005, 10:59 PM
no, each one needs closer to 4cf, which means the total box will need to be around 8cf. After you add in port and sub displacement it will easily be over 10cf, probably closer to 12cf.
ngsm13
02-12-2005, 03:40 AM
no, each one needs closer to 4cf, which means the total box will need to be around 8cf. After you add in port and sub displacement it will easily be over 10cf, probably closer to 12cf.
Yup, as stated above...optimal would be 8 cubes NET. The absolute minimum i'd shoot for would be 7 cubes NET. As far as tuning and port area, I'd go with 32hz and at least 70-80 sq. in. of port! Hit me up if you need a precise custom enclosure design. Can design and lay-out all specs for you, and include an exact cut-sheet listing exact size of every piece needed to be cut for $10. peace
NG
Yup, as stated above...optimal would be 8 cubes NET. The absolute minimum i'd shoot for would be 7 cubes NET. As far as tuning and port area, I'd go with 32hz and at least 70-80 sq. in. of port! Hit me up if you need a precise custom enclosure design. Can design and lay-out all specs for you, and include an exact cut-sheet listing exact size of every piece needed to be cut for $10. peace
NG
Automotive Network, Inc., Copyright ©2026