I want to......

.....Lower my Maisto Mclaren F1 at the front becuase at the moment the springs push the body up too high leaving a 1cm gap between the wheel and wheel arch.

Hey,

Get some type of clippers and take a few rungs off the springs. Simple. Easy. Good luck.

Frank X.

Job Done!

:useless:

Job Done!
Watch out for this...
I did the same with my McLaren F1 from Maisto but the problem is when you lower it a lot, just enough to make it feel cool, the wheels will touch the inside of the wheel arch and the car won't roll anymore...

Just try to lower it to the level that's the safest before lowering the springs.

Watch out for this...
I did the same with my McLaren F1 from Maisto but the problem is when you lower it a lot, just enough to make it feel cool, the wheels will touch the inside of the wheel arch and the car won't roll anymore...

Just try to lower it to the level that's the safest before lowering the springs.
It's a model. Why do the wheels have to roll. I took the spings comletely out of my Maisto McLaren. It looks far better than the huge gap.

This is the best before pic I can find:

http://img.photobucket.com/albums/v649/EnzoF60/Car%20pics/000_0192.jpg

And the after pics:


http://img.photobucket.com/albums/v649/EnzoF60/Car%20pics/000_0592.jpg


http://img.photobucket.com/albums/v649/EnzoF60/Car%20pics/000_0590.jpg

Car still rolls with no probs.

Good job

looks so much better now

job well done GOOD WORK

nice work man,
but it looks like the back is too low now. Just my 2 cents.

Don't bring up dead threads man..

It's a model. Why do the wheels have to roll. I took the spings comletely out of my Maisto McLaren. It looks far better than the huge gap.
yeas you r wright .yeas it's a model, if they don't roll,so what.long as its look's good and realistic. :smokin:

does anyone at all read the faqs?