t56 swap
ridge_runner
02-09-2005, 08:15 PM
anyone have any info on which starter is needed for this swap on a 3rd gen?? i cant find it anywhere.. i went and got a few diff starters and they all hit the bellhousing starter loop thing... any help is appreciated
87IROC-Z
02-09-2005, 08:38 PM
i beleive that its a 153 tooth starter
ridge_runner
02-09-2005, 09:38 PM
yea it is and i cant find one for the old style blocks.... the bolts are offset... i need a mini tq starter
ridge_runner
02-09-2005, 09:39 PM
i figured it out... thanks for the help tho
Genopsyde
02-09-2005, 09:50 PM
what was it???
ridge_runner
02-09-2005, 09:55 PM
the problem??? no starters designed for a specific car would fit... i have to get a universal one with no neck... one of these.... http://static.summitracing.com/global/images/prod/norm/mgm-3510grhb_m.jpg
tacoma man.
02-10-2005, 04:38 PM
the problem??? no starters designed for a specific car would fit... i have to get a universal one with no neck... one of these.... http://static.summitracing.com/global/images/prod/norm/mgm-3510grhb_m.jpg
you could use a lt1 starter *depending on the block style*, or just grind the bellhousing until its got enuff clearance.
you could use a lt1 starter *depending on the block style*, or just grind the bellhousing until its got enuff clearance.
ridge_runner
02-10-2005, 05:22 PM
lt1 starter wont fit... and i havnt found a starter to fit a 153 tooth flywheel that will bolt up except aftermarket
Automotive Network, Inc., Copyright ©2025