New Trans for the V6
notyouraveragegirl
02-09-2005, 05:25 PM
Ok... ...my other question related to my previous thread:
That year (98) V6 wasn't available in manual transmission as far as I know - is there a standard (5 or 6speed) tranny that will fit this motor -- or do i have to suck it up and live with an automatic?
That year (98) V6 wasn't available in manual transmission as far as I know - is there a standard (5 or 6speed) tranny that will fit this motor -- or do i have to suck it up and live with an automatic?
GScivic7
02-09-2005, 05:35 PM
do you know the engine code?
notyouraveragegirl
02-10-2005, 10:41 AM
i believe its J30A1 (3.0L USDM SOHC VTEC V6 98 Accord V6)
GScivic7
02-10-2005, 04:48 PM
I asked a few people and since there hasn't been a manual tranny that was built for that motor or any similar motors that you are stuck with the auto.
I was thinking though, you might be able to fab up an adapter plate so that the bell housing bolts up to the motor, but I still don't know what tranny you would use.
I was thinking though, you might be able to fab up an adapter plate so that the bell housing bolts up to the motor, but I still don't know what tranny you would use.
notyouraveragegirl
02-10-2005, 05:41 PM
well crap - if i can't figure this one out there's no use doing the V6 swap
hey thanks for your help : ) I'll hold out a little hope, anyway
hey thanks for your help : ) I'll hold out a little hope, anyway
nZero
02-10-2005, 06:33 PM
I thought the 01+ CL Type-S used a J series motor (J32A2?) and a 6-speed manual? Does that transmission not bolt up to the J30A1?
GScivic7
02-10-2005, 07:13 PM
Is it a J series motor? More than likely it'll bolt up to it if it is. The Type S did come with a 6 speed, I have no clue what motor it used though. J32 could essentially be a bored out J30.
JDMgirly
02-19-2005, 02:15 AM
Ok... ...my other question related to my previous thread:
That year (98) V6 wasn't available in manual transmission as far as I know - is there a standard (5 or 6speed) tranny that will fit this motor -- or do i have to suck it up and live with an automatic?
Ive seen ride of Ludegurl in prelude forum. I think it is an accord v6 with 6 speed tranny.
http://members.fortunecity.com/ludegurl/accord/04.jpg
http://members.fortunecity.com/ludegurl/accord/06.jpg
http://members.fortunecity.com/ludegurl/accord/09.jpg
That year (98) V6 wasn't available in manual transmission as far as I know - is there a standard (5 or 6speed) tranny that will fit this motor -- or do i have to suck it up and live with an automatic?
Ive seen ride of Ludegurl in prelude forum. I think it is an accord v6 with 6 speed tranny.
http://members.fortunecity.com/ludegurl/accord/04.jpg
http://members.fortunecity.com/ludegurl/accord/06.jpg
http://members.fortunecity.com/ludegurl/accord/09.jpg
notyouraveragegirl
02-19-2005, 01:19 PM
I thought the 01+ CL Type-S used a J series motor (J32A2?) and a 6-speed manual? Does that transmission not bolt up to the J30A1?
yeah i thought so too but then i put out a parts request for the tranny and hit a brick wall when i could only find CL trannies for the 4-cylinder
maybe it just was a bad luck week
HEY JDMGirly - is that engine code J30A1?
thanks for these little rays of sunshine, guys!! It looks like my plans are going to work out after all :lol2:
yeah i thought so too but then i put out a parts request for the tranny and hit a brick wall when i could only find CL trannies for the 4-cylinder
maybe it just was a bad luck week
HEY JDMGirly - is that engine code J30A1?
thanks for these little rays of sunshine, guys!! It looks like my plans are going to work out after all :lol2:
toyme
02-20-2005, 11:47 AM
HEY JDMGirly - is that engine code J30A1? :lol2:This is not JDMgirly but yes that 3.0 honda v6 up there is J30A1.
Are you trying to swap from auto tranny to 6 speed?
Try this link http://www.ecoparts.com/locations.htm for your part request. I think they're the largest auto wrecking junkyard in the US and they will find and ship the part to your door.
Are you trying to swap from auto tranny to 6 speed?
Try this link http://www.ecoparts.com/locations.htm for your part request. I think they're the largest auto wrecking junkyard in the US and they will find and ship the part to your door.
notyouraveragegirl
02-20-2005, 11:57 AM
thanks so much... that helps me kill two birds w/ one stone -- cause I was looking for a good salvage yard nearby, too : )
:lol2: :lol2: YOU ARE A LIFESAVER ! :lol2: :lol2:
:lol2: :lol2: YOU ARE A LIFESAVER ! :lol2: :lol2:
Automotive Network, Inc., Copyright ©2026
