Our Community is over 1 Million Strong. Join Us.

Grand Future Air Dried Beef Dog Food
Air Dried Dog Food | Real Beef

Grain-Free, Zero Fillers


PW onto a RS..???


hellah fresh
02-09-2005, 01:17 AM
Hi everyone... can anyone tell me which is the simplist wat to put power windows into my 96RS? Someone told me just get the power doors... someone else told me just to get the window motors/wire etc... please help me! rolling down your window sucks... specially if you see a girl on the passenger side when your on the driver side. =\ help RST!

imtheoneandonlyD
02-09-2005, 01:56 AM
just buy the door panels and wiring and such. I have power windows in my RS. Shouldnt be that complicated.

hellah fresh
02-09-2005, 10:42 AM
hey man... there are door panels that have pw on them and its on ebay. should i get those panels?

hellah fresh
02-09-2005, 10:43 AM
or do i also need the motorts... regulators... etc...?

drewh4386
02-09-2005, 01:02 PM
yes you are going to need the motors etc.

gthompson97
02-09-2005, 02:26 PM
it will be more than just the motors and panels. you'll have to wire everything in from inside the car too. you'll have to make a fusebox location for it and run all the wires through the door. then install the motors and the door panels. finally you'll have to connect the power and enjoy your new power windows.

hellah fresh
02-09-2005, 03:33 PM
dang thats alot of work... is it better just to goto the junk yard to find some doors? if thats not the best way... please list what is all needed. I appreciate everyone helping!

97_3clipse
02-09-2005, 07:18 PM
i think auto loc sells a kit that converts manual windows to power windows.

gthompson97
02-09-2005, 11:16 PM
you'll still need to run the wires and shit from the door to the main body of the car.

helliviknow
02-10-2005, 05:01 AM
well it wouldnt be a simple task to install either.. i got a good deal on a rs door to replace my gs door that was still smashed from the wreck b 4 i bought it. Well I figured it would be simple to change out the power window setup from my old door. Yeah from what I can tell you need the whole track assembly and I cant figure out a way to get the old one out and new one in without ripping the door apart. Then once you do that theres the problem of putting it back together. I'm not talking about screws I'm talking literally ripping the inside of the door frame from the shell then having to reattach it. I would just try to find gs doors from the junkyard. Thats what I'm planning on doing is finding a gs door from the junkyard and resaleing the rs door. peace

hellah fresh
02-11-2005, 02:13 AM
how much you think the Gs door will run? well im also going to check out that autoloc website to see about their kit. =\

Add your comment to this topic!


Quality Real Meat Nutrition for Dogs: Best Air Dried Dog Food | Real Beef Dog Food | Best Beef Dog Food