how to remove rear bumper

Hello all , i have a 95 Grand AM SE 3.1 L V6, all i want to know is how to remove the rear bumper, there is some rust hiding and i want to get in there and take car of it. thx

hey to remove a back bumper start from the top and work your way to the bottom inside the trunk pull back the carpeting, on the side closer to the taillight there should be a bolt probably a 10mm, there is two of the one on each side, remove the tail lights there are clips that run across the top pf the bumper use a forked scredriver to pop them out, inside the weel well there is onebolt probably a 10mm on each side there are clips along the bottom as well shouldn't any longer than 15c mins to pull one off i can get one off in 6 mins with air tools

Essentially, like quad describes. Here's a link to visualize what quad is saying.

http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/0e/60/60/0900823d800e6060.jsp