Coolant Block Drain Plug

I am trying to change & flush the coolant in my 2000 Cherokee. The manual says to remove the block drain plug and it will syphon & gravity drain out the radiator & block. I can't seem to get a wrench on the plug. It looks like it is square, but in between the 3/8" and 1/4" rachet sizes I have. Where can I get the right tool for this?

An automotive store will have a set of square sockets for the square head plugs you describe. Shouldn't cost more than about $20 for a set of 4 or 5 sockets. If you have 12 point sockets they will sometimes work if the plug isn't too tight but they can round off the corners if the plug is siezed.

JD

Actually it is a female plug. The square hole needs a tool to fit into it. I tried Autozone, and they had no clue. Maybe I better try Napa.

They will have them too. Try Sears or any store that sells mechanics tools... you need the 5/16 square drive.

JD

I will try sears. Thanks