Door Speaker Size/Removal

Don't think i'm dumb if this is simple, cuz I haven't even tried or looked at it yet (I always like to ask you guys first). What size are the door speakers and do I have to take off the whole panel to get to them or can I just pop off that speaker cover thing?? Thanks!

YA, and i am 90% sure thats 5 and 1/4 inch for the door speakers. But if u want to make sure go to www.crutchfield.com and u can pick your car and it will tell you what size your speakers are. But i am pretty sure that they are 5 1/4".

the fronts are 6.5" and the rears are 6x9. I replaced mine last summer.

any info on how u do it?

fronts or rears? it's actually really really simple

for the fronts you just unscrew all the screws for the door, and pull it off (lift it straight up) and the speakers are held in by 4 screws. uncrew that and plop in the aftermarket speakers. my aftermarket fronts are Infinity 62.5i 3 way 6.5 components, and they were too big to fit in the stock "speaker holder" that the stock speakers are enclosed in, so I just took it off and screwed them in w/o it. Works fine.

For the rears, it takes a bit more time. You have to remove the rear seat, and unscrew the side panels, but it honestly is not hard at all. I did not know what I was doing when I started, I just wanted to change them, but you just uncrew the bolts/screws, pull off the side panel, and replace the speakers, and put the panels on again.

oh okay so you do have to remove the whole door panel...thanks a lot!