Light Fixtures

Ok my left headlights are aimed kinda down, how do I reposition 'em?

And how do I make my small square lights (i think running, they're white not turning signals) to turn on? wiring problem?

if you're talking about the fog lights, theres a switch. you turn the headlights either on or to P, and push the button for your fog lights.. im pretty sure its right under the headlight switch in the 97's.. other than that i dont think there are any other lights...

can you post a picture?

theres only so many buttons, keep pressing them untill your fog lights turn on..... pretty common sence....

lol.. lemme take a pic of my 93.. with a different setup.. so you can understand how freakin easy it is.. i'll get it in a minute

There are no buttons under the lights. Just the knob and the dash-brightness wheel thing.

its really easy as the other guys said.. theres only three things where the light switch is. the nob for the regular lights, the wheel for the interior lights and the switch for the fog lights. if that switch doesnt turn them on you either have a short or yoru bulbs are burnt out.. my fog lights didnt work for a while and i ended up having to change them.. its an easy proccess to change them

and here we go with the massive multiple step photo guided process...

of course, first you must locate your switches.. mine is a 93, so its a little different.. JUST A LITTLE.. dont get confused now.. your button will probably be above where the radio is..
http://img.photobucket.com/albums/v713/KaotiKKid5/IMAG0060.jpg

then.. you turn the parking lights on.. the knobs will look kindof like this..
http://img.photobucket.com/albums/v713/KaotiKKid5/IMAG0061.jpg

then.. you push the button.. its really not that hard.. just make sure you extend your index finger fully, to avoid injury.. it should look like this.. when its on.. but dont forget.. YOURS IS PROBABLY ABOVE THE RADIO!
http://img.photobucket.com/albums/v713/KaotiKKid5/IMAG0063.jpg

finally, exit the vehicle to see if the lights came on.. like so.. NOT THAT DIFFICULT....
http://img.photobucket.com/albums/v713/KaotiKKid5/IMAG0064.jpg
http://img.photobucket.com/albums/v713/KaotiKKid5/IMAG0065.jpg


*xeno.. just make sure you dont pick fights with me and the guys on AIM.. the reason why i put my sn on here was for people with concerns or questions.. not for people to start fights and bother the hell out of me..

*sigh* guys with early 4th gens, the interior and taillights changed over in 97, the exterior in 98...

Xeno, you know where that little piece is that says "Camaro" right under the middle vents? There should be a couple sideways switches there, on mine the fog light switch is on the left and SGS (second gear start) is on the right, then the "camaro" to the right of that.

As for repositioning, the entire housing is one unit (no serperate bulb) so you have to reposition that whole thing..

i know this kasey.. i was merely trying to point out the process of turning the lights on... *not so sure he even knows how to do that*

YES I WAS RIGHT KAOTIC>>>>> BOOO YAAAA lol

read it..

i was distracted by the big black beast pics.... sorry...

i dont know if anyone answered the first part of your question. how to adjust the headlights. if i can remember right.. when i changed my bulbs there should be a screw that you can tighten or loosen to reposition the angle of your headlights. the fog lights should be the same way

i know.. my v6 is just such a monster of a machine that anyone could easily pay more attention to that than the point i was trying to get across.. i guess i need to add some shiny things in the text or something.. to take the attention away from the car..

If you haven't gotten the answer or figured it out maybe this will help. I have a 95 and I had to readjust my headlights. On the top of each light is a torx screw, a inch or so over is a level. If your car is on level ground you should turn that screw until the bubble in the level is between the red lines at 0. You may have to adjust the lights against a solid wall to get them aligned but the torx screw and the level is the way. Hope it helps.

KaotiKCamaro5........ sweet ride. looks like mine. Is that a cover you have over the fog lamps? if so what is it and where can I get one.

yep.. its a billet grille. i ordered it from a website, not sure which one, as to it was over a year ago. But i do know they have a ton of them on ebay for a lot less than what i paid. Mine is made by Grille Craft, looked the best in my opinion. I have several other pics if you want a better view.

is there an echo?

echhhhhoooooo ........... yup

echo.. echo.. echo.. echo...

*i hear it too..

nice..

Come on guys give me a break, Bless his heart, ya'll weren't specific enough. LOL.

hey bridget, post some pics of your car..

OOOPS shame on me for posting again BUT, yes I would like to see the other pics.

I don't know how to post a photo on the forum. I don't really mess around on it enough to get around very well. I had actually thought about posting a photo of my car but didn't think I would be on the forum that much.

put a picture in your profile and itll show up
what year do you have again?

1995

is it completely stock? or have you modified in any way

hey i have a 95 too.... and i wasnt trying to poke fun at you bridget... sorry... i was just making fun of the echo comment.... but yeah post up a pic.... pm kaotic if you need to know how...

Ok, now you are asking a woman about stock or modified. It has a gas pedal, gear shift, and I can put gas in it....just kidding LOL. It came right off the lot by the dealer and has not had any motor modifications. It's just a V6, 3.4L and obviously owned by a woman. I am in the process of repairs (way over needed) and will be changing the interior with racing seats, dash kit, and maybe (BIG MAYBE) darker carpet and headliner.

I understand Cuda, by the way ..... nice boobs LOL Had to get ya back. The pic you display, is it yours? NICE!

hey you have the same car as kaotic then.... just newer

yup that is my car, thanks.... my gf on the left and kaotics gf on the right.....

its not that hard, i recently discovered that it is actually a lot easier to use photobucket.com

*here are some of the better pics of my grille

http://img.photobucket.com/albums/v713/KaotiKKid5/frontandside.jpg

http://img.photobucket.com/albums/v713/KaotiKKid5/frontgrille1.jpg

http://img.photobucket.com/albums/v713/KaotiKKid5/camarosidegrille1.jpg

lol not that hard? u didnt even do it right slick

how is the grill attatched to the bumper?

in kaotics case..... duct tape id guess...

there are these little slots.. and you have to take the bottom splash guard off, drill through the bumper cover and it bolts on. its kindof a pain in the butt.. but worth it..

I like that grille. Probably saves on replacing the fog lamps too. Rock damage then having water trapped looks AWEFUL. By the way.. I posted a question about how to remove the fog lights. I don't know how. Cuda says ya'lls gf's are bouncing boobs around his Camaro. The chick on the right reminds me of "Dude looks like a lady". Cuda is that your photo in there?

* i hit it with a sledehammer until it fit..

i dont think ive ever seen that grill actually on a camaro before.. ive seen pics of it off but never installed.. doesnt look too bad
what about pricing

thats our newly appointed Camaro moderator FormulaLT1..

i paid 160 before i found it on ebay for like 60 bucks.. i was rather pissed.. oh well

lol yup thats John aka FormulaLT1(moderator)

Good night Gentlemen. Thanks for the info, ribbing, and the laughs. Sleep tight.

on a side note, i remember removing the fog lights when i installed my new pilot fog lights, but i am not quite sure hot they came out.. i did it over 2 years ago, i probably just pulled on them really hard.. lol. but i dont suggest you do that.

thats a little pricey for a grill.. but then again my racing stripes were about the same.. i rather just buy some mesh and cut it to the shape of the opening in the bumper

chicken wire....

well its not just some shitty mesh.. its actually got a nice powdercoat on it too.. i was also thinking about doing the mesh and cutting it.. but it looks cheesy as hell, and theres really nowhere to attach it..

very true

chicken wire... spray paint.... duct tape.... 15 bucks.... lol

stealing bolts from home depot because its pointless to wait in line for 15 minutes for something that costs 15 cents.. PRICELESS..

getting caught, going to jail, dropping the soap and being involved in some IDB action with BUBBA.....PRICELESS

>_> I haven o buttons for foglights i'm semi-adept mechanically. Could they have just been put on and the guy said 'they dont work' but need to be wired?

ps Kaotic #1 Sorry man was just teasing
#2 the pics didn't upload I only see the last one with your fogs on.