Can someone answer my radio question?

I am hooking up a Cd changer in my 93 villager and to make a long story short...............there is NO sound! everything is hooked up but no sound...

All the fuses are fine,everything pwr's up but no sound....Do these vans have amps or something? If so where are they located at?
thanks for any help

[email protected]

The main reason for no sound is that the factory sound systems use different wiring for the speakers. Some speakers get different positive and negs and have different ohms. I would look at crutchfield .com and ask around at local installers. You cannot just splice into a factory harness without knowing what wires are which. There also is the possibility of an amp being on board. DO you have any power, what is it doing? that needs to be answered as well.

I am hooking up a Cd changer in my 93 villager and to make a long story short...............there is NO sound! everything is hooked up but no sound...

All the fuses are fine,everything pwr's up but no sound....Do these vans have amps or something? If so where are they located at?
thanks for any help

[email protected]


CD changer or indash radio???? Sounds like you do not have either the power or FM modulator hooked up or maybe even a bad unit????

the amp was bad......but anyway i decided to just run new wire but thanks for the help..
everything is powered up and sounding good!