engine swap, 1991 3.1 engine to 1990 car
Robert Hapka
02-03-2005, 12:09 PM
I have pulled a 3.1 engine out of a 1991 Lumina that was in operation and put it into a 1990 Lumina and believe I have everything hooked up. There is spark and fuel pressure but no electricity to the injectors after checking with noid lite. Do these 2 years have a change in the wiring harness? THE COMPUTER SPEC. IS THE SAME FOR BOTH YEARS AND WE HAVE TRIED BOTH ECMS. PLEASE HELP IF YOU CAN.
jeffcoslacker
02-03-2005, 11:25 PM
You check fuses?
Robert Hapka
02-04-2005, 07:50 AM
You check fuses?
All fuses have been checked!
All fuses have been checked!
jeffcoslacker
02-04-2005, 08:56 AM
Just wanted to be sure. Despite my experience, I sometimes neglect the obvious.
jeffcoslacker
02-04-2005, 08:57 AM
Not missing any ground wires/straps?
Robert Hapka
02-12-2005, 11:58 AM
Not missing any ground wires/straps?
Thanks Jeff for responding. We finally found that we needed the wiring harness from the 1990 car's blown engine in order for the engine from the 1991 car to run while placed in the 1990 car. In runs good now.
Thanks Jeff for responding. We finally found that we needed the wiring harness from the 1990 car's blown engine in order for the engine from the 1991 car to run while placed in the 1990 car. In runs good now.
Automotive Network, Inc., Copyright ©2025