Is this set-up a good mix?

Ok. I have the set-up below planned out for my Prelude and i was wondering if any of you think the set up will work good, or you think i should add/subtract certain things.

My current mods are:

AEM CAI
AEM Power Pulleys
GReddy EVO
DC Ceramic 4-2-1 Header
Ground Control Coilovers
18" Katana C5s on 215/35ZR/18 Nitto 450s

What i want to add:

Crower/Skunk2 Stage2 cams
Crower/Skunk2 Cam Gears
Apex-i VAFC
Jackson Racing Supercharger
Fuel Pump
Fuel Injectors
Clutch/Flywheel
Completely DYNO tunned

My main concern is how well the cams will work with the supercharger. Everything else should come together well. What do you all think?

I think you should throw in some aftermarket struts into the mix.
Don't you bounce around a lot without them? How much are you lowered?

I have about a 2.5in drop in the front and 2" drop in the rear. I dont bounce at all. The car still drives smooth and soft. I thought the ride might be bumpy but it actually drives better than stock to me. The gound controls are by far the best lowering mod for the prelude. Im actually adding Koni adjustables soon, forgot to add that to the set up.

I think the Crower 63421T cams and 68184 valve springs would work well for you.

But you should definitely call Jackson Racing and see if they have any specific cam recommendations.
:cool: