440cc injector injector ?

ok now i need to double check and make sure that RC 440cc saturated injectors with HIGH RESISTANCE Approx. 12-16 OHMS measured at 43 P.S.I.G. will work w/a b18b1 non vtec. thanks

What are you upgrading for? Turbo, Nitrous?

you should not be concerned on how much you'll boost on the injectors. you should be concerned with it's duty cycle. resistance should be 10-13 ohms.

it is for a boost application. i'm am using a smaller turbo (t25) and i'm probably gonna run 10psi at the max and prob 6 psi for daily driving so i was just makin sure those would do the trick. thanks

Heres some info on Injectors and such a did awhile back. Should help you to understand some things.

Injector Info (http://www.automotiveforums.com/vbulletin/showthread.php?t=250614)

whether theyll work or not will depend on the ECU you're using(but most likely yes they will work since OBD1 cars used high impedence)

440cc's should be able to handle up to 300whp, maybe a tiny less.

what are you using to control the injectors?

i will be using the apexi s-afc