Reseting The Dic

Whats Up Everybody. I Have A 95 Olds Aurora With 162,ooo Miles On It. I Want To Reset The Dic, How Can This Be Done?
A Realay Went Bad For My Cooling Fans. And It Threw A Code. I Replaced The Relay, And Now I Want To Reset The Computer. Any Information Would Be Appreciated.

Whats Up Everybody. I Have A 95 Olds Aurora With 162,ooo Miles On It. I Want To Reset The Dic, How Can This Be Done?
A Realay Went Bad For My Cooling Fans. And It Threw A Code. I Replaced The Relay, And Now I Want To Reset The Computer. Any Information Would Be Appreciated.

Sure. Most of the Auto Parts stores, including Auto Zone, have code/diagnostic readers that will not only read the codes but clear them for you - FREE.

PHAREAL
Wot OldsAuroraMan1 said
And FYI the 1995 Aurora has a OBD-II connector to an OBD-I computer.

:2cents: (With the ignition on) Pushing "RESET" button on the Dic (drivers information center) for 5 seconds will clear the code thats displayed.
This works for Oil & Transmission. Sometimes you'll have to hold the button of the type displayed, then press reset. Example: press the ENG button so the OIL LIFE percentage or the TRNS LIFE percentage is displayed. Press "RESET" and hold for 5 seconds. The word RESET will appear, then OIL LIFE 100% or TRNS FLUID 100%.:smokin: