Question for the honda gods

I have found three Si's at the junk yard, I have already got a complete mpfi swap, si tranny, rear disk swap, rear seat and cluster. What other parts should I grab. I already have door panels, dash, and front seats from a si. thanx for any help these won't last long.

Oh by the way the Si's are hatchs 2 of them are 90-91 and one is a 89. Also I have a 89 Std civic.

Passenger side mirror if you don't have one, Front lip if it's in good shape

grab the front disks, calipers, etc.... You may as well grab the whole hub assembly and axles as well. Btw, how'd you get rear disks from an si hatch?...must have already had it done. Oh, and I hope the cluster you grabbed was an 89 to match your 89 STD...

get the ecu's from the 90-91's if you can get them cheap enough you can sell them. those are the ecu's needed for uberdata turboedit so on..they are worth some cash to the right people.

grab the front disks, calipers, etc.... You may as well grab the whole hub assembly and axles as well. Btw, how'd you get rear disks from an si hatch?...must have already had it done. Oh, and I hope the cluster you grabbed was an 89 to match your 89 STD...

90-91 si hatches came with rear discs...

90-91 si hatches came with rear discs...
dude, i was like 90% positive that they didnt. you got proof? anyone else know that?

dude, i was like 90% positive that they didnt. you got proof? anyone else know that?

my fault....i read through the post to fast...i was thinking the crx's....
lol. yah, the civic's never came with rear discs till the 92 si.

there is also the dash clock!! the wieres are alresdy there on standard civics or atleast on the dx that i had

get the ecu's from the 90-91's if you can get them cheap enough you can sell them. those are the ecu's needed for uberdata turboedit so on..they are worth some cash to the right people.

yeah, if you got em...i'll buy 'em

[email protected] ;)

my fault....i read through the post to fast...i was thinking the crx's....


the 90 crx doesn't have rear discs just the 91

yeah, if you got em...i'll buy 'em



i have a spare si ecu i could sell :naughty:

hey i need a si distributor if you can get one!

the 90 crx doesn't have rear discs just the 91

My `90 Si has rear disks.

the 90 crx doesn't have rear discs just the 91

No, 90-91 si both have rear disc. The crx im picking up next week has rear disc and its basically unmolested for the most part, so I know it came from factory.

I would buy one of the ecus from you. I just got my bottom end thrown together today and i need an ecu.


AIM Sn slipknotcraig133
or you can pm me

No, 90-91 si both have rear disc. The crx im picking up next week has rear disc and its basically unmolested for the most part, so I know it came from factory.

Yep... my 90 CRX Si has rear discs stock.

Didn't the Si's come with a oem sway bar?

CRX Si yes. not sure about civic si but most likely...

yea, hatches have the sway bar too.

And it will bolt to a STD. no prob?

And it will bolt to a STD. no prob?

If it's from a hatch to a hatch, it sure will. The front one will bolt right up, but for the rear one, your gonna need the Lower Control arms from it so you'll have the mounting holes.

Thanks to everyone's help so far. I grabbed the front and rear sway bar along with the LCA's today. What about 90-93 tegs, what could I get from them besides rear disks, suspension and brake wise ? One is a manual that has been ripped apart and the other two are autos.

how much did you pick up the mpfi swap parts for ? is there another set ?

how much did you pick up the mpfi swap parts for ? is there another set ?
There is another complete manifold,wiring harness, injector resistor box and one of the civics had a pg7 ecu, but no dizzy. I picked mine up for 110.