Cleaning decals?

what do you guys use to clean off decals before applying clear coat? I was going to use wax but i figure the clear wont stick to it. Also how long after a decal (cf) is applied, can you clear it? Thanks

Wax would prevent the clear from sticking to the surface.

Wait at least a week before clearing over any sort of decals.

How do you mean clean the decals - are they dirty, or do you just mean excess glue residue? If the latter, a very gentle wash under running water does the trick.

As for how long to wait before clear coating, I guess the simple answer is until it's dry. How long that actually takes can vary, depending on a number of factors. As Ray says a week to be safe, but you could probably get away with just a couple of days if the weather is good.

it seems like there is a smudge on it, don't want to clear it before i get rid of it, or itll look ugly.

Then I would recommend as Phil mentioned, just gently clean if under running water, or even use a soft damp cloth, just be careful not to damage the decals.

In that case can you could try some polishing compound to remove it. Very gently!

thanks guys, phil i'll use some compound.