Components and an amp
str8Subbin
01-14-2005, 01:57 AM
I was looking for a component system 5 1/4 and a decent amp to power them. i want to put components in all for doors and some 6x8's or 5x7's in the rear deck (it's a lincoln that's y i have those odd sizes in the back)
Suggestions??
Suggestions??
str8Subbin
01-14-2005, 01:59 AM
p.s. my price range for components is around $100 a pair (eBay that is) Ohh yeah i am also looking for a pair of 3 1/2's
bumpinstang77
01-15-2005, 01:28 AM
why in god's name do you need 3 pairs of speakers? Just get one really good component set for the front and be done w. it.
balls_to_the_wall
01-15-2005, 09:50 AM
Ok, REALLLLLY Dumb question here....what is ment by "component" speakers?
bumpinstang77
01-15-2005, 03:37 PM
6.5" crossover and tweeter ...... you can get them in diff. sizes but 5.6's are the best
sr20de4evr
01-15-2005, 03:47 PM
the different speakers (mid and tweet) are separate components that you mount separately. This would be opposed to a coaxial set where the mid and tweet are mounted in 1 unit (they share an axis, co-axial).
components:
http://www.crutchfield.com/S-bc8gXPPfqxW/cgi-bin/ProdView.asp?g=76400&I=1086000CS
coaxs:
http://www.crutchfield.com/S-bc8gXPPfqxW/cgi-bin/ProdView.asp?g=52000&I=1086002I
components:
http://www.crutchfield.com/S-bc8gXPPfqxW/cgi-bin/ProdView.asp?g=76400&I=1086000CS
coaxs:
http://www.crutchfield.com/S-bc8gXPPfqxW/cgi-bin/ProdView.asp?g=52000&I=1086002I
balls_to_the_wall
01-15-2005, 04:16 PM
Ok, thank you very much
str8Subbin
01-18-2005, 10:29 PM
ok maybe not the 6x8's in the rear deck but if i have holes in my center console from stock 3 1/2 y not fill them with something good. ohh and does anyone have ports that go into your car? cuz i was thinking about cutting my rear deck so that i can have the port from my future system inside my car instead of in my trunk
str8Subbin
01-18-2005, 10:29 PM
so no suggestions just an explanation to this dick wut a component system is??
sr20de4evr
01-18-2005, 11:58 PM
any chance you can just replace the 5.25's and spend all $300 on them? or maybe make some custom spacers and fit 6.5's up front instead?
str8Subbin
01-23-2005, 09:08 PM
yeah i can custom make something for 6.5s i dont' think i want to spend 300 on one pair tho
PaulD
01-23-2005, 10:30 PM
you would be better off spending $250-300 on one set of components for the front that 3 sets of $100 spekers
Automotive Network, Inc., Copyright ©2026
