seafoam?

any thoughts on best injector cleaner/ upper engine cleaner? my current method is to put a can or two of seamfoam in a full tank and dump a little in the pcv hose while its idling, these things in combination every oil change or so really seem to help it out. If anyone has suggestions on good cleaners or methods, please post!

SeaFoam is the BEST! I use it in mine. On my 88 I leave it running and SLOWLY pour it into the TBI unit, careful not to kill the motor. I also open the throttle some by hand under the hood as I pour it in, just to keep it from dieing.

any thoughts on best injector cleaner/ upper engine cleaner? my current method is to put a can or two of seamfoam in a full tank and dump a little in the pcv hose while its idling, these things in combination every oil change or so really seem to help it out. If anyone has suggestions on good cleaners or methods, please post!

Use the inline fuel injector cleaner.

Hooks up to fuel rail.
Start truck
Pull Fuel relay
turn cleaner on.
runs engine for about 10 minutes
BOOM new engine.