installing header

can anyone give me a good site on and easy way to install 1 piece header on a 98 ex civic? or a quick walk through?

1- Jack Up Front End Of Car High Enough To Get Under And Unbolt The Manifold From The Rest Of The Exhaust System (onlt 2 Bolts)
2- Take Off The Heat Shield Covering The Manifold (should On Be About 4 Or 5 Bolts)
3-unbolt The Manifold From The Engine Block( 12 Bolts)
4-there May Be Abolt In The Middle Of The Manifold, Holding Manifold To The Body
5-pull Of Manifold
6- Use Same Steps To Put On Header

Also, if your car is aged at all, you will need some penetrating spray or lube for the bolts. I just did mine at the end of december, had to do some soldering to lengthen the o2 sensor wires because the header came off of a 94 lx and i have a 99 ex, but other than that it was simple.

Can anyone tell me what exhaust and headers should i get that will fit my car. I have a 98 2dr civic with a h22a. I dont know if my exhaust is going to fit. ie all the pipes line up.

Can anyone tell me what exhaust and headers should i get that will fit my car. I have a 98 2dr civic with a h22a. I dont know if my exhaust is going to fit. ie all the pipes line up.

I've got a DC Sports 4-2-1 stainless header with a Greddy Evo Cat-back Exhaust... It's served me well but both are about three years old now... need another CBE...
CL

old thread alert! please look at post dates before you post..

What the hell Civicleader, this thread is half a year old.