ADvice?? help??

ok im goin to drop a b16a2 in my 92 hatch .. does it matter if i dont have axles?? or it need to be change .. well also about my radiator i dont know if i can still use my stock one but im probly gona change it . well i dont no waht kind of radiator would be good for this motor or does it mater at all.. well if i can get a sight or info about tha radiator that go in my hatch that will be great.. also waht about the fans? i neda replace em too?

hey thanks for the coment yea im jus skepticle and wonderin sorry if i sound stupid. haha (first timer)

Yes you need the axles for the swap. Is that motor the '99-'00 Si B16a2 or the JDM B16a SiRII motor? Because if it's the actual b16a2, then you're going to have to do a wiring conversion (OBD1 car and OBD2 motor). Also if you don't have them already you'll need the ECU, shiftlinkage, and mounts to do the swap.
You don't need to get a new radiator, you can if you want to. You could get a Del Sol one, a '99-'00 Si one, or one from a company like Fluidyne, C&R, or Koyo (check here for comparisons of the last 3: http://www.jhpusa.com/catalog/index.php?cPath=21_112) You also don't need to change out your fan either, but there are aftermarket ones available. FAL makes nice, thin fans. They really push air like crazy.

umm it is a 92-95 b16a2